Product Details
expand_less
| Terminal Type |
Pin |
| Connector Gender |
Male |
| Connector Shape |
Rectangular |
| Grade Type |
Regular |
| Connector Quantity |
1 |
| Terminal Quantity |
6 |
| Mounting Hardware Included |
No |
| Terminal Gender |
Male |
| Mounting Bracket Included |
No |
| Wiring Harness Included |
No |
| Color |
Black |
| Universal Or Specific Fit |
Specific |
| Sensor Type |
Resistor |
| Prop 65 |
NO |
| SDS Required |
No |
| Mounting Hole Quantity |
2 |
| E-Waste |
Yes |
| First Application Year |
2003 |
| Package Contents |
Mass Air Flow Sensor; Instruction Sheet |
| FAQs |
Visually inspect the sensor element in the MAF for damage or for a burnt smell. In the VANE AIRFLOW sensor, inspect the door for binding or for a burnt smell. unit. Start the engine and tap lightly on the unit. If tapping causes an engine malfunction or intermittent operation the unit is faulty and must be replaced. |
| Mounting Type |
Bolt-on |
| Bracket Included |
No |
| Housing Included |
No |
| Is Or Contains A Bulb |
No |
| Is Or Contains A Battery |
No |
| Product Condition |
New |
| Is Item A Chemical |
No |
| Contains Electronic Components |
Circuit Board |
| Is or contains a battery? |
No |
| Is or contains a bulb? |
No |
| Is the item CARB affected? |
No |
| Is item a chemical? |
No |
| Contains Electronic Components? |
Circuit Board |
| FAQ_Q5 |
What goes bad in MAF sensors? |
| FAQ_A1 |
A malfunctioning MAF/VANE air flow sensor can cause any one or more of the following symptoms: hesitation, stalling, poor fuel economy or poor engine performance. |
| FAQ_Q3 |
What are the most common causes of MAF/VANE air flow sensor problems? |
| FAQ_A4 |
The most common causes are: a worn vane assembly, a cracked housing, or a cracked printed circuit board. These conditions all require unit replacement. |
| FAQ_Q4 |
What goes bad in vane air flow type units? |
| FAQ_A3 |
Over-voltage sources from relays, short circuited wiring, cracked printed circuit boards, moisture entering the unit through split air ducts, electrical connections and wiring, air intake obstructions or gas/oil fumes from the engine can cause failure. Check air filter and air ways for dirt or debris. Check for loose or faulty connectors and broken or faulty wiring. Be sure to check these to prevent damage to the replacement unit. |
| FAQ_Q2 |
How can I determine if the MAF/VANE air flow sensor is bad? |
| FAQ_A2 |
Visually inspect the sensor element in the MAF for damage or for a burnt smell. In the VANE AIRFLOW sensor, inspect the door for binding or for a burnt smell. Check for diagnostic trouble codes with a scanner. |
| FAQ_A5 |
The most common causes are: cracked circuit boards, burnt sensing elements, poor solder joints, deteriorated conformal coating, or loose printed circuit board components. |
| FAQ_Q1 |
How can a malfunctioning MAF/VANE air flow sensor affect my vehicles operation? |
| Is Prop Sixty Five Affected |
No |
| Does it require SDS |
No |
| Is the item CARB affected |
No |
| Part Terminology |
Mass Air Flow Sensor |
Features & Benefits
expand_more
CARDONE Engineered Technology ensures that all CARDONE New Mass Air Flow Sensors precisely track O.E. output curves and maintain strict tolerances to ensure accurate scan tool readings for proper operation. Every component is rated to handle a broad range of environmental conditions, including temperature and altitude.
Application Summary
expand_more
INFINITI EX35 2012-08, EX37 2013, FX35 2012-03, FX37 2013, FX45 2008-05, FX50 2013-09, G25 2012-11, G35 2008-04, G37 2013-08, JX35 2013, M35 2010-06, M37 2013-11, M45 2010-06, Q40 2015, Q45 2006-05, Q50 2016-14, Q60 2016-14, Q70 2018-14, Q70L 2018-15, QX5
